Du-All offer
$30 off
Clearing any sink, toilet or main sewer line
Not valid with other offers. Not valid on prior service. Limit one coupon per service call.
Above ground. Below ground. Du-All.
Toilet repair for your Stuart home or business.
Du-All Plumbing provides toilet repair in Stuart. We fix toilets that run, leak at the base or supply line, rock on the floor, clog repeatedly or need replacing, and we account for whether the home is on gravity sewer, a grinder pump or septic.
Request service
Share your property address and the problem you’re seeing. A Du-All team member will call you to arrange service.
This request does not confirm an appointment. To speak with the team, call 772-238-6456.
4.6/5 on Google348 reviews · Lake Worth BeachRead Google reviews (opens in a new tab)
Stuart toilet repairs, from flappers to flanges
Quick answer
Du-All Plumbing provides toilet repair in Stuart. We fix toilets that run, leak at the base or supply line, rock on the floor, clog repeatedly or need replacing, and we account for whether the home is on gravity sewer, a grinder pump or septic. Call 772-238-6456.
A toilet that wobbles, weeps at the base or refills on its own is easy to live with for a week and expensive to live with for a year. Du-All Plumbing repairs toilets in Stuart homes and businesses and tells you clearly whether a repair or a replacement makes more sense.
Stuart homes leave the toilet in three different ways. Older parts of the city drain to conventional gravity sewer. Many homes that once used onsite tanks were connected through the City's sewer expansion program, which the City says uses low pressure sewer piping along the road and an individual grinder pump station at each home. Other properties, particularly outside city limits, still rely on septic tanks. The City named its expansion zones by street, such as the Stypmann area along SE Stypmann Boulevard and SE Martin Luther King Jr. Boulevard and a zone near SE Ocean Boulevard.
For a toilet that simply runs, rocks or drips, none of that changes the repair. It matters a great deal when a toilet drains slowly or backs up. With gravity sewer, the question is whether the clog is in the toilet or further down the house line. With a grinder station, a pump fault or power loss can stop drainage from the whole house, and repeated flushing only fills the station tank. With an onsite system, a full tank or tired drainfield can make every drain sluggish at once.
Who supplies your water also varies. The City Utility Division serves about 3.4 square miles, mostly inside city limits, while many Stuart mailing addresses are Martin County Utilities customers. Your bill tells you which, and it also shows whether you are billed for sewer.

A toilet should feel completely solid. If it shifts when you sit down, the wax seal underneath is being squeezed and released every time, and eventually it stops sealing. That can let a little water out after each flush and let sewer gas into the room. The causes vary: closet bolts that have loosened, a flange that has cracked or rusted, a floor that is not flat, or new tile that left the flange below the finished floor.
Tightening the nuts until the movement stops can crack the porcelain base, so please resist it. The right repair is to lift the toilet, look at the flange, and fix what is actually wrong. That might be a flange repair ring, a spacer for a raised floor, stainless shims to level the bowl, or new bolts. Then the toilet goes back on a fresh seal and is snugged evenly.
Not every wet floor around a toilet is a seal leak. On muggy days, cold water in the tank can make the outside of the tank and bowl sweat, and the drips collect on the floor. A sweating toilet is wet all over its outer surface, more so after several flushes in a row. Our guide to toilet sweating covers ways to reduce it.
A seal leak behaves differently. The floor at the base is wet mostly after flushing, the grout or flooring nearby may darken, and there may be a faint odor. A supply line drip leaves water near the wall valve and along the line. Wipe everything dry and watch where water shows up first. If it is the seal, the toilet needs to be reset, not caulked over.
The City's leak test sheet tells customers to shut off all water use, record the meter, and check again after at least two hours, and it lists toilets among the fixtures to rule out. That test tells you water is flowing somewhere. To tie it to a toilet, use a dye tablet in the tank, wait ten minutes without flushing and look for color in the bowl, then flush. Color means water is leaking from the tank into the bowl, often at the flapper or its seat.
No color does not settle it, since leaks can be intermittent. A tank that keeps refilling may also have a fill valve set too high, with water rising into the overflow tube. Either way, the fix is a part, not a new toilet. The City sheet also notes that repairs on the owner's side of the meter are the owner's responsibility and that customers who find a leak may ask Customer Service about a leak adjustment. We do not decide eligibility, but we can describe in writing what we repaired.
Du-All offer
Clearing any sink, toilet or main sewer line
Not valid with other offers. Not valid on prior service. Limit one coupon per service call.
Du-All offer
Any new toilet
Not valid with other offers. Not valid on prior service. Limit one coupon per service call.
A plunger with a flange that fits the bowl outlet clears most single toilet clogs. Use slow, firm strokes and keep the water level below the rim. If it does not clear after a few attempts, stop. Repeated flushing to test a clog is how bathrooms flood. Skip chemical drain openers; they rarely clear a toilet and they make the next step more hazardous for whoever does it.
If other fixtures are also slow, or water rises in a tub when the toilet is flushed, the problem is beyond the toilet. On a grinder station home, check whether the station alarm is on. On an onsite system, the tank may need service. On gravity sewer, a line clearing visit may be the answer. In every case, stop using water and keep people and pets away from any sewage.
Many toilets are worth repairing. Replacement starts to make more sense when the tank or bowl is cracked, when parts for an unusual tank design are no longer available, when the bowl clears poorly even with a clean trapway, or when the fixture is an older high-volume model. EPA WaterSense notes that older toilets can use as much as six gallons per flush, while labeled models use 1.28 gallons or less and still pass performance testing.
If replacement is the call, we measure the rough-in so the new toilet fits the drain, check the height and shape you want, and replace the shutoff valve and supply line if they are worn. If a rebate would affect your decision, ask your water provider about current programs before you buy.
The flexible line between the wall valve and the tank carries full water pressure all day, every day. Plastic coupling nuts can crack, and older lines can split, and either one can release a lot of water while a home is empty. When we are already working on a toilet, we look at the line and the stop valve. If the valve is seized or drips when turned, or the line looks worn, replacing both at once is inexpensive and removes a common source of sudden floods.
Please do not test an old valve by forcing it. If it does not turn by hand, leave it, and use the flapper or float to stop the tank filling until we arrive.
We work in Downtown Stuart, the Stypmann Boulevard and SE Ocean Boulevard areas, and across ZIP codes 34994, 34996 and 34997, whether the water bill comes from the City or Martin County Utilities. If a toilet is not the source of a high water reading, our Stuart leak detection service can help. Visit our toilet problems guide or contact Du-All Plumbing.
Nearby, see Palm City toilet repair, Port Salerno toilet repair and Port St. Lucie toilet repair.
Before you call
Items like wipes and paper towels are hard on grinder pumps. If the station alarm is on, stop using water and contact the utility. A toilet clog alone stays in the toilet and does not reach the pump.
Condensation wets the whole outer surface of the tank and bowl. A failing seal shows water at the base after flushing, often with staining or odor.
No. Caulk can hide a failed seal underneath. The toilet needs to be lifted and reset on a new seal.
Ask the City or Martin County Utilities, whichever bills you, about current programs before you buy. Do not assume one exists.
The City's leak test sheet says customers who find a leak may ask Customer Service about a leak adjustment. Eligibility is the utility's decision, and nothing is guaranteed.
See all plumbing services in Stuart for this city.
Nearby toilet repair
Back to toilet problems, or browse every city on our locations page.
The page video and hero photo are shared Du-All site media, not footage of a specific job in this city.
Tell us about your Stuart property, which toilet is acting up and what you have noticed.
Not valid with other offers. Not valid on prior service. Limit one coupon per service call.
Lake Worth Beach office
514 S E Coast St, Lake Worth Beach, FL 33460
561-623-3111
Palm City office
3442 SW Armellini Ave, Palm City, FL 34990
772-238-6456